View FAR_235868.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

FUJITSU SEMICONDUCTOR DATA SHEET
DS07-20103-1E
Resonator
Piezoelectric Resonator (8 to 16 MHz) FAR Family (C4 series G type)
s DESCRIPTION
Fujitsu resonators C4 series (G type) feature originally developed single crystals with a high electromechanical coefficient (LiNbO3 lithium niobate), the result is ultra compact packaging. C4 series (G type) with built-in capacitors for exclusive use in microcomputer clocks, and this series is chip type device for surface-mount.
s FEATURES
* * * * * Ultra compact package. Wide frequency range in 8 to 16 MHz. C4 (G type), with built-in capacitors, is the best suited to the source of microcomputer clocks. C4 (G type) can be shipped in emboss-typed packages for automatic mounting. The resonators have superior shock and vibration resistance, preventing damage during automatic mounting process.
s PACKAGE
FAR Family (C4 series G type)
s STANDARD CHARACTERISTICS
Series Parameter Material Frequency Standard frequency Initial frequency deviation Temperature characteristics (-20C to 60C) Capacity of built-in capacitor C4 series (G type) Lithium Niobate (LiNbO3) 8 to 16 MHz See "s Standard Frequency." 0.5% () 0.5% 104 pF type are also available. However, the characteristics of 104 pF type should be specified by Fujitsu, considering matching data with applied IC (mainly microcomputer.) Remarks
208 pF (Standard)
Aging stability Operating temperature Storage temperature Standard measuring circuit
Within 0.1% -30C to +85C -40C to +100C
(1) Oscillation frequency (2) Serial resonant resistance R
1 M
1
R3 C1
2
75 OSC
C1 C2
75 LM
C2
8 MHz to 10 MHz IC: 1/6 MB84069B x 2 10 MHz to 16 MHz IC: 1/6 MC74HC04 x 2 * VCC=5 V DC * R : Resonator * C1, C2 : Loading capacitance (built-in)
Measuring equipment: Network analyzer R: Resonator
2
FAR Family (C4 series G type)
s STANDARD FREQUENCY
Standard frequency (KHz) 8,000 10,000 11,000 11,059 12,000 16,000 Package size G Resonant resistance 100 max. (Symbol: 5) 75 max. (Symbol: 2)
G
Note: * For oscillation frequency (in 8 to 16 MHz) other than standard, Fujitsu can also develop applicable part. * Resonant resistance of the part is specified according to applied frequency as above.
s NOTES ON USE
* * Handle carefully Solder under the following conditions. 5 seconds max. at 230C (PCB) Do not apply extreme heat to the resonator. Recommended preheating is 150C for one minute. Avoid extreme fluctuations in temperature during use. There is no specific direction in resonator mounting. Oscillation data should be examined when used in oscillation circuit with micon or other ICs. This is for reflow solder, not for flow solder.
* * * *
3
FAR Family (C4 series G type)
s PART NUMBERING SYSTEM
FAR C4 (1) C G (4) R (5) (6) (7) (8) (9)
(2) (3)
(1) Series Series C4 Single crystal LiNbO3 Capacitor With built-in capacitors
(2) Package Type Specification C Type Chip type
(3) Package Size Specification G (4) Frequency (KHz) See "s Standard Frequency." [Example] 8.0 MHz 08000 Size G type(Ultra compact)
(5) Initial Frequency Deviation Specification M Deviation 0.5%
(6) Built-in Capacitor Specification 0 1 Capacitance 208 pF 104 pF
(7) Resonant Resistance Specification 2 5 Resonant resistance 75 max. 100 max.
4
FAR Family (C4 series G type)
(8) User-specific Special Symbols Specification Name -- A to Z Description No specification, no taping specification No specification, with taping specification Serial number for custom design
(9) Taping Specification Specification R Description 12 mm width tape & reel
s MARKING
Fujitsu logo Frequency (MHz) & Deviation
The stamp color varies according to built-in capacitor. Marking color
F
12 A
n 10 pF 20 pF Yellow White
Lot No. (Date confirms to EIAJ. * ) *EIAJ RC1001 standard Year Jan Feb Mar 1993 A B C 1994 Q N P 1995 a b 1996 n
Apr
May
Jun
Jul
Aug
Sep
Oct
Nov
Dec
D R d r
E S e
F T f t
G U u
H V v
J W j
K X
L Y
M Z
Note: The code on and after Jan 1997 is specified repeatedly from "A".
5
FAR Family (C4 series G type)
s PIN ASSIGNMENT
(1)
(2)
(3)
(1)
(3)
(2)
s DIMENSIONS
.200(5.1)
.083(2.1)
.059(1.5)
.220(5.6)
.018(0.47)
.102(2.6)
.035 (0.9)
.063 (1.6)
.035 (0.9)
.040 (1.0)
.040 (1.0) .006(0.15)
.006(0.15)
Unit: inches (mm)
6
FAR Family (C4 series G type)
s TAPE & REEL DIMENSIONS
.157.004(4.00.1) .079.004(2.00.1) .059.004 0 (1.5 0.1 ) 0 .012(0.3) .059 .004 (1.50.1)
.089.004 (2.250.1)
.217.004 (5.50.1)
.472.012 (12.00.3)
6.20.1
.089.004 (2.250.1)
3.10.1 .315.004 (8.00.1)
.040.004 0 (1.0 0.1) 0
.075(1.9)
.055.059 (14.01.5) .079.020 (2.00.5) .512.008 (13.00.2) 12.992.078 (3302.0)
3.150 (80) .827.031 (210.8) R .039(1.0)
.079.020 (2.00.5)
Unit: inches (mm) Reel quantity QTY/reel 3,000 pcs
7
FAR Family (C4 series G type)
s RESONATOR BUSINESS FLOW CHART
Oscillation frequency should be varied according to applied micro controller or another IC's. Fujitsu should recommend the resonator parts considering matching condition with applied IC. Following shows business flow chart. CUSTOMER
RECEIVE INQUIRY MATCHING DATA AVAILABLE
FJ
TO CHECK APPLIED CPU AND AVAILABILITY OF MATCHING DATA NO MATCHING DATA TO BORROW APPLIED CPU
TO TAKE MATCHING DATA (3 WEEKS)
TO SUBMIT DATA
NECESSARY TO CHECK THE NECESSITY OF FREQUENCY ADJUSTMENT NOT NECESSARY REDESIGN (6 WEEKS)
TO SUBMIT SAMPLE
NOT OK EVALUATION OK
TO SUBMIT SPEC
SIGN AND SEND BACK
8
FAR Family (C4 series G type)
FUJITSU LIMITED
For further information please contact: Japan FUJITSU MEDIA DEVICES LIMITED Marketing and Technical Support Dept. SHINYOKOHAMA SQUARE BLDG 2-3-12,Shin-yokohama, Kouhoku-ku, Yokohama-shi, Kanagawa 222-0033, Japan Tel: +81-45-471-0067 Fax: +81-45-471-0069
http://www.fujitsu.co.jp/hypertext/fmd/English/index.html
All Rights Reserved. The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU sales representatives before ordering. The information and circuit diagrams in this document are presented as examples of semiconductor device applications, and are not intended to be incorporated in devices for actual use. Also, FUJITSU is unable to assume responsibility for infringement of any patent rights or other rights of third parties arising from the use of this information or circuit diagrams. The contents of this document may not be reproduced or copied without the permission of FUJITSU LIMITED. FUJITSU semiconductor devices are intended for use in standard applications (computers, office automation and other office equipments, industrial, communications, and measurement equipments, personal or household devices, etc.). CAUTION: Customers considering the use of our products in special applications where failure or abnormal operation may directly affect human lives or cause physical injury or property damage, or where extremely high levels of reliability are demanded (such as aerospace systems, atomic energy controls, sea floor repeaters, vehicle operating controls, medical devices for life support, etc.) are requested to consult with FUJITSU sales representatives before such use. The company will not be responsible for damages arising from such use without prior approval. Any semiconductor devices have inherently a certain rate of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions. If any products described in this document represent goods or technologies subject to certain restrictions on export under the Foreign Exchange and Foreign Trade Control Law of Japan, the prior authorization by Japanese government should be required for export of those products from Japan.
North and South America FUJITSU MICROELECTRONICS, INC. 3545 North First Street, San Jose, CA 95134-1804, U.S.A. Tel: +1-408-922-9000 Fax: +1-408-922-9179 Customer Response Center Mon. - Fri.: 7 am - 5 pm (PST) Tel: +1-800-866-8608 Fax: +1-408-922-9179 http://www.fujitsumicro.com/ Europe FUJITSU MICROELECTRONICS EUROPE GmbH Am Siebenstein 6-10, D-63303 Dreieich-Buchschlag, Germany Tel: +49-6103-690-0 Fax: +49-6103-690-122 http://www.fujitsu-fme.com/ Asia Pacific FUJITSU MICROELECTRONICS ASIA PTE. LTD. #05-08, 151 Lorong Chuan, New Tech Park, Singapore 556741 Tel: +65-281-0770 Fax: +65-281-0220 http://www.fmap.com.sg/
F9703 (c) FUJITSU LIMITED Printed in Japan

▲Up To Search▲

Price & Availability of FAR

	To Download FAR Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .